How to improve the efficiency of fully automatic tapping machine

The precision of the fully automatic tooth tapping machine is very vertical and stable. Perfect threads can also be made for punched products of thin plates or soft products such as lightweight metals and synthetic resins. Screw tapping can operate smoothly without the need for force when moving forward and backward, and produces high-quality processed products without causing threads of different thicknesses. There is no unstable or defective quality phenomenon.
The key requirements for improving the efficiency of fully automatic tooth tapping machines are:
1. The fully automatic tapping machine requires the addition of coolant during operation.
The cutting speed of the tapping machine must be proportional to the thread.
If the tooth tapping machine cannot smoothly tap the teeth, it must be straightened by hand before working.
4. When using the fully automatic tapping machine, it is necessary to promptly clean the debris inside the screw hole to avoid affecting the tooth opening of the tapping machine.
5. The tooth opening position of the fully automatic tapping machine must be connected to the thread, so that it is easier to work unobstructed and the quality of the thread will be higher.
6. Check and replace the damaged tapping gear transmission output shaft oil every month, once is sufficient; Multiple inspections and replacements can also be carried out.
7. Clean the debris inside the fully automatic tapping machine electrical cabinet every day to ensure the cleanliness of the electrical cabinet.