What are the precautions to be taken when operating a fully automatic drilling machine?

What are the precautions to be taken when operating a fully automatic drilling machine?
Before each startup, it is necessary to check whether the smooth oil in the smooth oil pump behind the machine tool is sufficient, whether the air compressor is turned on, and whether the cutting fluid is sufficient.
When starting, first turn on the main power supply, then press the start button in the CNC power supply. After the machine detects all functions, rotate the emergency stop button clockwise. Press the zero button until the XYZ indicator light on the panel lights up and enters standby mode.
3. The loading operation of the spindle, turret, and magazine should be carried out when the mechanical movement is stopped, and attention should be paid to cooperation with partners to prevent accidents. Manually or actively, when changing tools, pay attention to the rotation of the turret, magazine, robotic arm, and the installation orientation of the tools. Keep your body and head away from the rotating parts of the tools to prevent collisions.
    4. It is necessary to pay attention during manual operation. Before moving in the X and Y directions, it is necessary for the Z-axis to be in the lifting position. During the movement, it is not only necessary to observe the changes in coordinate orientation on the control panel, but also to observe the movement of the tool. After the tool is moved into place, check the operation panel for minor adjustments.
5. When clamping, the workpiece should be clamped to prevent it from flying out and causing accidents. After clamping is completed, pay attention to taking out adjustment tools such as chuck wrenches to prevent the spindle from rolling out and causing accidents.
When using a computer for serial communication, the drilling rig needs to be started first, and then the computer needs to be started; Turn off the computer first, then turn off the drilling rig. Prevent the instantaneous change of current during the switching process from affecting the computer caused by the drilling rig.
When the machine tool alarms, search for the cause based on the alarm number, promptly clear the alarm, and do not stop the machine, otherwise it will still be in the alarm state after starting up.